BEAMMASTER + LAYOUTMASTER
Structural steel has long been used in the construction of commercial and industrial building structures.
With the range of products offered by AGT Robotics, the BeamMaster and the LayoutMaster, the design of the structural steel has never been easier and faster.
BEAMMASTER + LAYOUTMASTER
Simply send a pre-fit beam to the BEAMMASTER and watch it robotically complete the required welds in a fraction of the time it would take a manual welder.
When equipped with the optional beam rotators, the entire sequence is completely autonomous as the robot automatically positions the welds into the horizontal position every time.
With the LayoutMaster simply select the right beam assembly from the menu, align the projector with your beam origin and start fitting. All the information required to fit error-free is available to your operator.
With the LAYOUTMASTER, you’ll never need a measuring tape or a drawing again. Simply select the right beam assembly from the menu, align the projector with your beam origin and start fitting.
EASY TO USE
REDUCE YOUR RELIANCE ON SKILLED LABOR
The skilled labor shortage is with us and getting more critical every day. The BeamMaster and LayoutMaster help you to reduce your reliance on skilled labor.
Quality welded assemblies and accurately fit parts can be produced without the need for highly skilled personnel. With some basic instruction your handler/tacker can now accurately fit parts in a fraction of the time of your best fitter - error free!
The BeamMaster will produce quality welded assemblies at 3-4 x the speed of your manual operations – without the need for a skilled welder to operate it.
Cortex software generates all of the welding programs and robot paths eliminating the need for a Skilled Robotics Programmer.
BEST COST PER TON. PERIOD.
COMBINING A LAOUTMASTER AND A BEAMMASTER
Combining a LayoutMaster and a BeamMaster is the most cost-effective way of fitting and welding beam assemblies. Compared to manual fitting and welding, the BeamMaster/ LayoutMaster combination can be as productive as 6 to 8 fitter/welders.
Moreover, the quality and productivity is the same at any hour of the day. Employees will appreciate our easy-to-use, easy to maintain solution. Managers will like the reliability and performance. Owners will love the bottom line !
MORE PROFIT PER SQUARE FT
Optimize your floorspace!
MEETS CHANGING NEEDS
The BeamMaster and LayoutMaster are highly configurable solutions.
Investing in robots and automation can increase productivity, ease the pain of labor shortages and increase profits. In today’s highly competitive environment, not every fabricator is ready or able to go «all-in» right at the start.
Both the BEAMMASTER/LAYOUTMASTER are designed to be fully modular, allowing a fabricator to start with a one-zone, one robot, trestle setup, enjoying the benefits of robotic welding immediately.
A logical upgrade path would include adding beam rotators, a second-zone, and finally a LAYOUTMASTER to cover two zones. There are many ways to configure and grow your automated fitting and welding capabilities. Ask how we can help!
BEAMMASTER 1 ZONEOne working zone with rotators
BEAMMASTER 2 ZONETwo working areas with rotator
BEAMMASTER 2 ZONE + LAYOUTMASTERTwo working areas with rotator + LayoutMaster
Do you have questions about this product?